On this page
Display of beam elements from Equipment vertical mass option (Presel/HydroD/Xtract)
The display of beam elements from the equipment vertical mass option is different in Presel, HydroD and Xtract.
Presel and HydroD will show the "vertical mass" beam elements as beam 'tents', i.e. without eccentricities, in the same way as for the option "beams and mass" from equipments.
Xtract will show the vertical beam elements, i.e. with eccentricities, when the beam cross section is shown. In wireframe mode of beam elements, the eccentricities are not shown. The beam elements are shown in the same way as for the option "beams and mass" from equipments.